Skip to main content
Stesso

Custom-Tint the Caulk with Paint

5:16
7:20
4.8K views

At 5:16 in

SashCo Sealants You Need To Try | Lexel, Through the Roof, Exact Color

Watch on YouTube

What happens here

Using the provided syringe, carefully measure and inject the desired quantity of water-based paint into the Exact Color Sealant cartridge. The manufacturer recommends using only water-based paints, as solvent-based paints will not properly mix with the sealant. After adding the paint, firmly close the cartridge and vigorously shake it for about one minute to ensure the paint and sealant are fully combined. Then, add the included thickener (if applicable, as per product instructions) and shake for another minute to achieve a uniform mixture.

Goal: Tint and Mix the Caulk

Tools and materials

  • Syringe Sashco — Used to accurately inject the paint into the caulk cartridge. Typically provided with the product
  • Thickener Sashco — An additive to help the caulk achieve the correct consistency after tinting. Typically included with the product

What they say

Hide

give you one disclaimer any waterbased pain right if you put solvent based pain in here it won't mix bad news bad news so not good um but but it takes about 3 minutes to mix it up right you put the paint in mix for a minute put the thickener in mix for another minute and then you need to let it set for about 30 minutes just to body up right and uh then you can clck it out and then it's going to out and it's going to dry to the exact color that you need it to

Auto-generated from the video audio.